Call Now:
079-26890039
Email Now:
info@sltsafety.com
  • 1
  • 2
  • 2
  • full width slider
12 23 34 4

Hand Protection

Machine Knitted Gloves | EN 420

  • Machine Knitted (seamless)

  • Elasticated cuff

  • Great as a liner Category: 1 Length :24-26 CM

  • Shell Colour: Natural or Navy Blue Weight
    40gm, 50gm, 60gm and 80gm per Pair



Knitted Gloves with Dots | EN 420

  • Machine knitted (seamless) with Dots Elasticated cuff

  • Great as a liner Category: 1 Length: 24-26 CM

  • Colour: Shell colour Navy Blue, Dots colour Blue OR
    Shell colour Natural, Dots colour Blue

  • Weight 50gm and 60gm per Pair



Cypress Hand Gloves | Work Gloves | EN 420, EN 388

  • Cotton/polyester with rubber coating

  • All-round handling gloves for professional and
    leisure use. Category :2

  • Really good grip, "anti-slip" Suitable for: All
    tasks in dry conditions, where it is most important
    with a sure grip

  • Length : 23-24 CM Suitable for: All tasks in dry
    conditions, where it is most important with a
    sure grip



Ruby Nitrile | Assembly Gloves | EN 420, EN 388

  • Nylon liner ensures excellent flexibility and fitting

  • Nitrile foam coating in palm and fingertips provides
    superior grip in light oily and dry conditions

  • Especially good touch sensitivity. Category :2 Length :24-28 CM

  • An excellent abrasion resistance combined with dexterity
    and breathability

  • Suitable for: Assembly and finishing, Metal fabrication
    Aerospace industry, General site & factory maintenance
    Warehouse work and general handling



Ruby PU | Assembly Gloves | EN 420, EN 388

  • PU coated High wear resistance Extremely good touch sensitivity

  • Category: 2 Length: 22-25 CM Good breathability

  • Suitable for: Detailed assembly with requirements to good
    touch sensitivity Transport/warehousing, Car workshops
    Plastic industries, etc



Maple Plus | Work Gloves | EN 420, EN 388

  • Nitrile dipped, fully coated with cuff

  • Special nitrile formulation provides an excellent
    combination of flexibility, mechanical resistance
    and oil repellency.Silicone-free. Ensure cleanliness
    of metal sheets: important in steel and motor industries

  • Length: 26 CM Category:2 Best in dry and strongly abrasive
    conditions; stone, concrete elements, etc

  • Suitable for: Refuse collection, Sheet and light metals
    handling, Stamping operations, Gas and electricity supply,
    Assembling and inspecting engine parts, General handling



Starfish Plus | PVC Supported Gloves | EN 420, EN 388
EN 374

  • A supported PVC double dippded glove provide excellent
    abrasion and tear resistance

  • Inner cotton lining provide better grip and free from any riged

  • Applied for maximum comfort. Suitable for: Oil and
    petrochemical industry | Fishing/fish farming
    Handling shellfish | Deck work etc

  • Length: 30 cm, 35 cm, 41 cm (26 cm PVC + 15cm Fabric cuff)
    66 cm (26cm PVC + 40 cm fabric cuff)



Coral | Nitrile Unsupported Chemical Resistant Gloves
EN 420, EN 388, EN 374

  • Material: Nitrile Lining: Cotton flock lined. Length: 33 CM

  • Thickness: 0.38 MM (15 mil)

  • Specially designed to provide outstanding abrasion and
    solvent resistance

  • Anti-slip pattern for good grip in wet and dry conditions

  • Suitable for: Industrial cleaning, Petrochemical Industry
    Aerospace and automobile industry, Printing industry
    Surface coating, Metal fabrication



Cat fish | Latex with Neoprene Gloves | EN 420,
EN 388, EN 374

  • An unsupported natural latex gloves half-coated with neoprene

  • Zig-zag textured palm and inner cotton flock lined.
    Colour: Bicolor (Blue and Yellow)

  • Length: 33 CM Thickness : 0.60 MM (24 mil)



Shelfish | Neoprene Gloves | EN 420, EN 388, EN 374

  • Material: Neoprene High chemical resistance

  • Anti-slip pattern for good grip in wet and dry conditions

  • Pure cotton flock lining to absorb perspiration.
    Length : 33 CM Thickness: 0.70 MM (28 mil)

  • Suitable for: Automotive Industry, Chemical Industry
    Industrial Cleaning, Oil Refining



Industrial Rubber Gloves

  • Extra thick for greater protection

  • Soft flock lining which absorbs perspiration and
    feels comfortable while exposed to solvent

  • Low in soluble proteins Length: 30 cm

  • Application: Electronics and semi conducto Industry
    Food Processing, Tank Cleaning, Household use
    Light assembly



Kilimanjaro PD | Heavy Duty Knitted with Dots
EN 420, EN 388

  • High tensile strength

  • Very good grip. Machine knitted (seamless)

  • Weight : 80g/pair For warehouse work, handling
    packaging, inspection, etc

  • Option : Double side dotting



House Hold

  • Anti-slip pattern for strong grip in both wet and dry conditions

  • Anatomically shaped for comfort. Pure cotton flock
    lining to absorb perspiration Length: 30cm

  • Application: Electronics and semi conducto Industry
    Food Processing, Tank Cleaning, Household use
    Light assembly



Electrical Gloves

  • Made of Natural Rubber which gives maximum dexterity for
    better gripping No Puncture, as each & every
    pair is tested

  • TEST POTENTIAL
    (VOLTS)
    5000 10000 11000 15000 25000 33000 33000
    WORKING POTENTIAL
    (VOLTS)
    650 1100 1100 3300 5000 7500 11000
    SIZE
    mm
    355 355 355 355 355 355 355




Electrical Hand Gloves | Insulating Gloves for
Electrical Works | EN 60903:2003

  • Our full range of insulating gloves for live working
    complies with the specifications of the European
    standard EN 60903:2003 and the international
    standard IEC 60903:2002

  • Up to 500 V Class - 00

  • ELECTRICAL REQUIREMENTS | ROUTINE TEST & SAMPLING TEST
    CLASS MAX OPERATING
    VOLTAGE(VOLTS)
    PROOF TEST
    VOLTAGE(VOLTS)
    WITHSTAND VOLTAGE
    (VOLTS)
    00 500 2500 5000
    0 1000 5000 10000
    1 7500 10000 20000
    2 17000) 20000 30000
    3 26500 30000 40000
    4 36000 40000 50000



Penguin | Assembly Gloves | EN 420, EN 388

  • A-grade grain leather, unlined Fits the hand well

  • Soft and strong leather ensuring long life-span

  • Suitable for: Varied engineering work with high wear
    and tear requirements

  • Category : 2 Length : 25 CM



Ranier | Welder's Gloves | EN 420, EN 388, EN 407

  • Split leather, fully lined

  • Very good snag, cut, abrasion and puncture resistance

  • Reinforced palm strip for better protection and durability

  • Excellent dry grip Very good comfort. Category : 2 Length: 35 CM



Ranier Plus | EN 420, EN 388, EN 407

  • Split leather gloves with aramid palm

  • Provide cost effective protection is required from
    contact heat in palm area

  • Available in different inner liner of cotton as
    well as appropriate insulating materials

  • Length 35 cm Application For Contact Heat up to 250 C0



Shasta Plus | Leather Heat Resistance
EN 420, EN 388, EN 407

  • A high quality heat resistance gloves are made with a combination of high
    quality chromium tanned leather and 11" long heat resistance seamless knitted
    liner covering the area from finger-tips to the wrist with optional feature
    of a 35 mm long seamless knitted liner to cover larger portion of the forearm

  • Provides protection from contact heat (300 deg C)

  • While the cut, puncture and abrasion resistance of the glove is attributed
    to the outer leather, the inner seamless knit liner provides added cut
    resistance combined with tear and heat resistance

  • Long, tapering cuff design helps easy wear-ability and removal

  • Stitched with inherently flame retardant aramid thread so that
    the seams exhibit maximum thermal and mechanical strength



Everest Plus | EN 388 | EN 407

  • Yellow seamless knitted Kevlar protective glove with a
    100% cotton inner liner

  • Suitable for mainly cut and heat protection

  • Glove material Outer - Kevlar, Inner liner - Cotton

  • Outstanding cut resistance Very good comfort Excellent
    heat resistance up to 350C0

  • Machine washable at 40 C0



Everest Grip | EN 420 | EN388

  • Seamless knitted 100% para-aramid liners enable a snug fit

  • Palm dipped with natural latex with a uniform crinkle
    finish for good surface grip

  • Provide excellent dexterity, cut, abrasion and puncture resistance

  • Latex coating absorbs pressure when carrying heavy objects,making
    handling ergonomically safe and comfortable Provides excellent
    tear resistance and thus last long



K2 Nova

  • Multi-layered heat resistant gloves, made primarily with permanently
    heat and flame resistant materials and tested as per the relevant
    international standards

  • Provides excellent protection from radiant and contact heat

  • Different base fabric and liner options available to meet the
    requirements of specific hazards and operational needs Long
    tapering cuff design helps easy wear-ability and removal

  • Available with an optional TEMPOW leather palm for superior
    abrasion resistance Sewn with heat, flame and cut
    resistant aramid ya

  • Popularly used for working around furnaces, boilers, molten
    metal and other - applications requiring protection from
    radiant and contact heat



K2 Plus | KEVLAR INSULATED GLOVE

  • Multi-layered heat resistant gloves, made primarily with
    permanently heat and flame resistant materials and tested
    as per the relevant international standards

  • Provides excellent protection from contact heat and flames

  • Different fabric and liner options available to meet the
    requirements of specific hazards and operational needs

  • Long, tapering cuff design helps easy wear-ability and removal
    Sewn with heat, flame and cut resistant aramid yarn

  • Popularly used for applications related with casting, forging
    and handling heated objects. Provide protection up to Contact
    temrature 450 C0



K2 Shine | Fully Alluminised Gloves

  • Made primarily with permanently heat and flame resistant materials
    and tested as per the relevant international standards

  • Provides excellent protection from contact heat and flames
    Different fabric and liner options available to meet the
    requirements of specific hazards and operational needs

  • Long, tapering cuff design helps easy wear-ability and removal
    Sewn with heat, flame and cut resistant aramid yarn

  • Popularly used for applications related to near furnace Provide
    protection up to Contact temperature 750 C0 and radiant heat 1000 C0



Everest Forepro | KAF-002-Y-U | Kevlar Sleeve

  • These 100% aramid knitted sleeves are secured at the palm
    and provide protection to the wrist and arm from heat,cuts
    scratches, and other hazards

  • An Important product for handling metal sheets, it is
    available without the thumb-hole as well

  • Double layer, half arm



Leather Sleeve

  • Grey Split Leather

  • Buckle and fastening strap for quick and easy fitting and removal

  • mm length gives complete arm protection Size: One size fits all Length: 550 mm



Lilly

  • Sleeves are used for protecting the forearm and depending
    upon its length, the upperare too

  • The most economical of our forearm protection products, these
    100% cotton sleeves provide protection against minor mechanical
    and thermal hazards



Nitirle Examination Gloves | EN 420 | EN 374 | EN 455

  • Unpowdered nitrile glove. Blue translucent Single use. Length : 24 cm

  • CE CATEGORY: II Intermediary risks In accordance with

  • STANDARDS: EN 420-2003 EEC | Basic standards EN 374-2003

    Chemical hazards EN 455-1&2 | Medical Standards European
    directive N1934/2004, Food contact CHARACTERISTICS

    European Glove Standards
    EN 420 General requirements.See instruction for use
    EN 374 Protection against bacteriological risk
    EN 388 Protection against mechanical risk
    EN 407 Protection against thermal risks
    EN 455 Medical gloves for single use




EN 388 - Protective Gloves against Mechanical Risks

    For category II and higher, the performance level
    with the corresponding pictogram must be shown

  • On the protective glove

  • On the instruction manual

  • On the packaging

  • Only when these conditions are met, you can be sure to
    have a glove according to category II or higher

    (a) Number of cycles in "abrasion machine"
    (b) Resistance to the rotating blade
    (c) Specimen torn across its "natural" direction
    (d) Sharp awl pressed against specimen
TEST Level 1 Level 2 Level 3 Level 4 Level 5
Abrashion resistance 100 500 2000 8000
Blade cut resistance 1.2 2.5 5.0 10.0 20.0
Tear resistance 10 25 50 75
Puncture resistance 20 60 100 150




© 2016: All Right Reserved | Allweb.in